SyntheticCPT

  • Beta
  • Geotechnical
  • Built by InsightML

Predicts cone penetration test profiles from 2D seismic, then builds them into a 3D soil-behaviour model of the ground below the seabed.

Beta: running on our staging platform; not yet in production. A demo is a 30-minute call on a public North Sea site, such as the three below.

Animation of a 3D block of the ground below the seabed at IJmuiden Ver Alpha and Beta. A vertical cut steps north through the site, exposing one slice at a time. Colours show the predicted soil-behaviour type: clay, silt-clay, silt-sand, sand, dense sand and very stiff. The block is mostly sand-coloured, with patches of silt-sand and clay.
IJmuiden Ver Alpha and Beta, Netherlands. Predicted Robertson soil-behaviour types in vertical slices, 200× vertical exaggeration. These are model predictions, not a geotechnical interpretation.

What it's for

  • See between your CPTs

    A cone penetration test measures the ground at one spot. SyntheticCPT predicts a profile at every seismic trace, so it estimates the ground between the real CPTs you have.

  • Use the seismic you already have

    It works from 2D ultra-high-resolution seismic that a site investigation has already collected. It needs no new survey.

  • See the whole site

    Predicted soil-behaviour types across the whole site, to review alongside real CPTs and an engineer's judgement.

Model card

Task
Predict CPT profiles (cone resistance qc, sleeve friction fs and pore pressure u2) at every seismic trace, then classify them into Robertson soil-behaviour types.
Inputs
2D ultra-high-resolution (UHR) seismic traces and their location.
Outputs
qc, fs and u2 profiles with a probability range at every depth, and a 3D soil-behaviour model of the site.
Scale so far
454,030 synthetic CPTs across three North Sea sites: North Sea 1 (Denmark), Hollandse Kust Zuid and IJmuiden Ver Alpha and Beta (Netherlands).

Where it has run

Three offshore-wind sites in the North Sea have been predicted across the whole site so far, all from public tender data.

SiteCountrySynthetic CPTs
NDS North Sea 1Denmark228,777
HKZ Hollandse Kust ZuidNetherlands118,361
IJVAB IJmuiden Ver Alpha & BetaNetherlands106,892
Total so far454,030
Animated 3D ground model of the North Sea 1 site off Denmark. A vertical cut sweeps through it from south to north, showing predicted soil types: mostly yellow sand, green patches of sand mixtures near the seabed, a green sand-mixture layer along the base and thin blue clay lenses in between.
North Sea 1, Denmark. 228,777 predicted locations in vertical slices, 200× vertical exaggeration, with the top metre masked. These are model predictions, not a geotechnical interpretation.

Limits

  • Predictions, not interpretations. Use alongside real CPTs and a geotechnical engineer.
  • Works within a surveyed site; it is not expected to generalise to a site it has never seen.
  • Output covers the top 30 m below the seabed; the top ~1 m is masked as near-surface noise.
  • Predicted pore pressure (u2) is not physical everywhere, for example below ~15 m at one site.
  • The probability ranges for this model have not yet been calibrated.
  • Resolution is limited by the seismic, about 1 m at some sites and 0.3–0.5 m at others.

Credits

Built by InsightML: Liam Cracknell, Freddie Allen-Stevens.

Data: public offshore-wind tender data.